This Patent-Pending Stringless Alignment Bracket is designed to give your car a reference plane for measuring toe on the rear wheels individually. This bracket bolts to the differential of your S13 or S14. This assembly must be used with toe plates to measure each wheel individually. The measurement plate height can be adjusted to fit your vehicles ride height.
The complete assembly, mounting hardware and instructions included in standard order. Two matching fraction measuring tapes optional. Made of Carbon Fiber reinforced plastic standard or optional Extreme Temperature and Strength Carbon Fiber Nylon rated for over 180°C!
This is compatible with the stock S13 or S14 differential without a passenger side diff brace. Check the mounting method. If you have a brace attached here, some modifications to your setup may be required at this time. Please reach out directly if you have any questions or suggestions for changes to improve the design.
This is not compatible with the 350Z diff swap. If you have a 350Z diff, you'll need to buy the 350Z kit.
Before selecting your option, measure from the lower right diff cover bolt to the ground as shown in the image. The value below is the shortest height for the current design.
