This Patent-Pending Stringless Alignment Bracket is designed to give your car a reference plane for measuring toe on the rear wheels individually. This bracket bolts to the differential of your 350Z or G35. This assembly must be used with toe plates. The measurement plate height can be adjusted to fit your vehicles ride height.
The complete assembly, mounting hardware and instructions included in standard order. Two matching fraction measuring tapes optional. Made of Carbon Fiber reinforced plastic standard or optional Extreme Temperature and Strength Carbon Fiber Nylon rated for over 180°C!
This is compatible on 350Z vehicles with the stock differential. Longer studs are available for use with the GK Tech or ISR Diff Braces. At this time, this is not compatible with the FDF or PLM style diff braces.
Note: On some vehicles with rear sway bars, there may be slight interference with the front of the center plate. Trimming the top corner of the plate may be necessary to get clearance from the sway bar.
Before selecting your option, measure from the lowest right diff cover bolt to the ground as shown in the image. The value below is the shortest height for the current design.
